Post Image

Solar panels are cheap, and due to improvements in manufacturing, economies of scale and other factors, they are getting even cheaper. But, that leaves most of us with the problem of where to put them. While solar panels are easy to come by, land and roof space to put them on is not. If fact, it is quite the opposite; solar panels get cheaper while property prices increase.

The results of the new and original concept presented here are astonishing. After performing this experiment we’ll find that we can more than triple our output for a given area; actually, data shows an increase in output of 670%. If you have 100 sq feet, you can go from 1kW to 6.7kW of output power! If you have 1,000 sq feet, you can go from 10kW to 67kW!…

Land is an expensive part of solar farming in most cases.The technology described here has the potential to save us billions in the development of large scale solar applications by reducing land costs, and in addition, this particular advancement can make energy independence truly possible for the average home owner.

Let’s find out how…This discourse from the standard method is based on our findings from previous experiments to determine the nature of light. Now that we have determined that light is a wave and not imaginary particles, we can begin to treat it as such and by doing so we can then reap the benefits of our new found knowledge.

If light were particles, then to optimize for efficiency we would want to maximize area on the plane perpendicular to the source in order to collect as many of these particles as we can. But, it is not. Light is a wave, a vibration with an energetic potential difference between points of positive and negative amplitude.

So, rather than collecting “photons” like particles in a bucket, let us harvest the energy from a wave of light in a way similar to other known waves.

Sound, for instance, can be captured very efficiently. As a sound engineer for many years I have witnessed this for myself. Sound waves, for a given area, are best absorbed not by a flat wall but by an array of ridges known as studio foam. In “the quietest place in the world,” Microsoft’s award-winning anechoic audio lab, the walls are composed of long wedges which cause the sound to reflect multiple times, each time losing an amount of energy to the wedge.

Knowing that light is a wave, we can take advantage of that same property and given that light is of a higher frequency than sound (0.003-7.5 x 10^14Hz at 299,000,000 m/s compared to 20Hz-20kHz at 343.2 m/s) we will have more reflections for a given distance and therefore more opportunities to capture that energy.

We will keep in mind that, when capturing the energy of a wave, at every successive interval energy will decrease because amplitude is lost at each reflection point. This will result in exponentially decreasing energy with respect to the number of reflections. But these reflections, if graphed based on our theoretical geometry, show a fractal pattern pattern of data that is additive at every point of reflection. At the scale of this experiment we will be capturing the energy from up to 100,000 reflections or more, opposed to one single reflection captured with a typical flat solar array orientation.

In a recording studio environment it is advantageous to reflectively direct sound waves into wedge-like cavities to absorb that energy instead of allowing the sound to bounce off the wall while maintaining a large portion of it’s energy. In a solar array, as we are about to find, it is similarly advantageous to do the same.

Instead of letting light hit our solar panels and bounce off as wasted energy we will set up a configuration that reflects each light wave multiple times extracting more and more energy each time. This reflection will cause the inside of the solar panel configuration to appear darker than a standard flat configuration which we can observe by measuring reflected light traveling in the inverse direction as the source. Most importantly though, we will observe that by taking advantage of the known wave properties of light, we can extract significantly more energy for a given area.

Let’s begin…

The basic parts of this configuration are simple and are the same components used in any solar array. We are simply going to optimize our configuration to produce the most energy from a given area.
The core of the parts required are, of course, the solar cells. We are going to design a configuration that allows for more of them to fit in your yard, on your roof or on your town’s solar farm.

For this project, we’ll be designing a handy platform for testing, experiment, optimization and demonstration.
Once you see for yourself how much more energy you can get from a square inch, you’ll want to immediately scale it up!
Let’s begin with a small scale version first, though.

Optimized Solar Array™ Kit
$199.00+s&h
Order Now

Parts include:

(8) Solar Cells, uniform (ex. 2×4″, 6v,1w)
(2 ft.) 12-22g Insulated Wire
(2) Digital Voltmeters, low draw, may require resistors/dummy load
(2) Plexiglass, 8×10″
(4) 5/16″ Bolts
(8-12) 5/16″ Nuts
(4) 5/16″ Washers, End Caps

Tools needed:
Soldering Iron, Solder
Drill, Bits, and Cut Disk
Hot Glue Gun, Glue

Testing equipment:
Multimeter
Luxmeter (light meter)

Optimized Solar Array™ Kit
$199.00+s&h
Order Now

You may also take this time to review and print the attached diagram which includes a data sheet to be filled out during testing.

Once we have our materials in order we can proceed.

We are optimizing for area. Solar cells are easy to come by; space to put them is not. Let’s use this novel configuration to maximize our use of space.

What we will be doing is geometrically orienting our solar cells to:
Firstly, capture more of the energy by minimizing losses due to reflection, and additionally, fit more photo-voltaic material in a given space.

The first step is to wire our cells and according to the previous diagram we can fit two traditionally oriented 2×4″ cells in an area of 4×4″, and with the new orientation design presented here we can fit six 2×4″ cells in a space of only 1.5×4″.

Our first pair will be our control, the same old solar panel configuration. We’ll wire them up in series and signify the leads by attaching appropriately colored wire.

Our next array will be our experimental setup which contains six cells in series as well which will keep current constant for this experiment allowing us to measure variable voltage. Allowing an extra few millimeters in the length of the wire used for your series connections and pre-bending them will avoid binding in the next step. You may also add your output leads to the opposing positive and negative terminals and your wiring will be complete.

Take this opportunity to test for functionality and continuity.

Now we will be implementing our knowledge of the nature of light through the use of wave theory, vector analysis and geometry. Sound difficult? It’s not.

Light is a wave that reflects. Each time it reflects, some energy is lost and some energy remains. Based on this, we can decide to orient our configuration to that it reflects again and again which will allow us to capture energy again and again from a single ray of light.

First though, we will orient our control set side-by-side just like every solar array you’ve ever seen.

Next, we will produce the experimental array. This can be built according to my specifications or adjusted at your discretion. With our set of six wired cells, we will attach them one at a time with glue. We will pair our cells in “V” shapes with a measured angle of 22.5°, which results in a gap at the open end of 0.5 inches for each pair. This can easily be recalculated for cells of a different dimension. Each “V” should have the solar cells facing inward. We will now attach the three pairs with glue which should result in an overall width of only about 1.5 inches, as shown.

These two arrays can then be tested again, adjusted if necessary and put to the side.
It is important to have a level, stable and consistent platform to keep all variables constant for experimental purposes. We will be measuring distances from artificial light sources to a high degree of accuracy and placing the platform in natural light which must remain exactingly consistent for accurate results which can be dependably scaled up.

To build this platform we will attach our components to a sheet of plexiglass or other suitable material. First, plan, measure and trace component placement on the sheet based on the supplied diagram. Then, drill holes for wiring and in the corners for mounting and cut holes for your meters. You will want to drill corner holes in both sheets simultaneously for parallelism after the wiring and meter holes have been made in the first sheet.

You may then mount your two solar array configurations side-by-side and upright, on the same tangent with reference to a light source above. Next, mount your voltmeters and wire them accordingly. The meters serve for demonstration purposes but I also incorporated additional leads to attach a multimeter for more accurate experimental readings and better display in bright sunlight.
Once complete, add a nut to your bolts and drop on the sheet with holes in the corners and ensure it is level. This sheet will serve as a bottom cover. Add another nut to secure the bottom sheet and for spacing, then add your top sheet with components mounted and secure it in place.

The experimental platform is now ready to test this new and innovative solar array.

Testing can be performed by the following methods.

This array can be tested laboratorially in the presence of a consistent-lumen light source such as a standard lamp. With a single artificial light source in close proximity, we will test each array independently in order to keep input constant. First, place a light meter on the flat control array, apply constant light and note the lux reading. Then, carefully remove the meter and note the voltage. With low intensity artificial light, your meters may be insufficient and a more accurate powered multimeter may be required to obtain a reading. Then, repeat the process with the experimental array. It is very important to ensure both tests are performed at exactly the same light level. Because the experimental array sits higher, you will need to adjust your light source in order to test at the same lux reading as your control. Once you have reached a lux reading precisely equal to your control test, carefully remove the meter and note the voltage.

You will find that even your experimental array produces significantly more power even though it requires only a fraction of the area!

Repeat the process outside in natural high intensity sunlight and the results will be compounded even more!

To calculate the efficiency increase with respect to area, we will adjust voltage for input variance if necessary, calculate voltage per square inch and simplify which will give us a qualitative result which we’ll call our efficacy coefficient

My tests show an improvement of 670%, over six times the energy from the same space!
This technology has the potential to allow for the roof of a single family home to produce enough power for complete energy independence and will result in solar farms being only a fraction of the size and cost. This type of array can be used on electric vehicles with limited space like electric bicycles, electric cars and even to power geosynchronous satellites in space.

Try the experiment for yourself, record your data and then scale it up to power your home, electric car or anything else. Use of this principle in conjunction with modern photo-voltaic cells will result in world record efficiency. Try combining this configuration with a solar tracker and you will be able to harness more solar energy from a square meter than you ever thought possible.

Optimized Solar Array™ Kit
$199.00+s&h
Order Now

sfgba at 3:34 pm, December 9, 2016 -

wow why don’t we have this already?

Ralph Peteranderl at 2:36 pm, February 11, 2018 -

I think one problem would be alignment for the cells – a flat solar cell is more or less fine at any angle of illumination. On the other hand, unless the plane of the sun path is perpendicular to the plane of the solar cell array, most of the cells will be in the shade

Drew Paul at 7:33 pm, February 20, 2018 -

This is a very astute observation and you are absolutely correct. This is only one stage of the optimization and, in application, would require being paired with parabolic reflectors or solar trackers.

Ken Donahue at 5:53 pm, July 13, 2018 -

Have you run this experiment with the cells standing up on end?

Drew Paul at 8:38 pm, July 17, 2018 -

No, sure haven’t. What I am working on now is combining this array with a solar tracker. The benefit of this array is that it captures a higher amount of energy that a typical flat arrangement. It’s downfall is that if it is not properly oriented at all times its output decreases drastically. Therefore combining this design with a solar tracker or parabolic reflector will produce optimum energy output with respect to area. Thanks for checking out my article and stay in touch for updates.

lock liquidity at 11:42 pm, October 28, 2021 -

You could definitely see your skills within the article
you write. The sector hopes for even more passionate writers like you who aren’t
afraid to say how they believe. At all times go after your
heart.

พิชิตจุดหมายกันครับ at 4:20 am, October 29, 2021 -

you are in reality a just right webmaster. The site
loading speed is amazing. It seems that you’re doing any unique trick.
Also, The contents are masterwork. you have performed a wonderful job
in this subject!

سكس at 5:55 am, October 29, 2021 -

Hey very interesting blog!

Prestige Watch Club Rolex watches at 6:18 am, October 29, 2021 -

Usually I don’t read post on blogs, but I wish to say that this write-up very forced me to check out and do so! My watch is solar powered which got me into this tech
Thank you, very nice post.

Science at 9:47 am, October 29, 2021 -

Hello would you mind letting me know which hosting company you’re utilizing?
I’ve loaded your blog in 3 different browsers and I must say
this blog loads a lot faster then most. Can you recommend a good web hosting provider
at a fair price? Thanks a lot, I appreciate it!

Drew Paul at 5:44 am, February 25, 2022 -

blabor!

learn more at 10:58 am, October 29, 2021 -

Hi there, I enjoy reading all of your article post. I wanted to write a little comment to
support you.

룸알바 at 1:02 pm, October 29, 2021 -

You really make it seem really easy along with your presentation however
I in finding this matter to be really something that I believe I
might by no means understand. It kind of feels
too complicated and very wide for me. I am looking forward for your subsequent post, I’ll attempt to get the hang of it!

sci-hub at 2:16 pm, October 29, 2021 -

Hi there, I check your blogs daily. Your writing style is witty, keep it up!

dolar777 at 3:30 pm, October 29, 2021 -

Heyy there, I think your blog might be having browser compatibility issues.
When I look at your blog site in Firefox, it looks fine but when opening in Internet Explorer, it has
some overlapping. I just wanted to give you a quick
heads up! Other then that, superb blog!

Central IT Support at 4:08 pm, October 29, 2021 -

It’s really a nice and helpful piece of information. I am satisfied
that you shared this useful info with us. Please keep us up to date
like this. Thanks for sharing.

AllenLog at 6:34 pm, October 29, 2021 -

Hello. And Bye.

sexual revolution (roger waters song) at 8:04 pm, October 29, 2021 -

Really no matter if someone doesn’t be aware of then its up to other visitors that they will help, so here
it happens.

Dp Boss matka at 8:42 pm, October 29, 2021 -

Greetings! I know thgis iss kinda off topic but I was wondering if you knew where I could get solar panels cheap?
I’m usiung thee same design aas yours and I’m haaving problems finsing one?
Thanks a lot!

Comments are closed.